EV Update Media – Electric Vehicles and Battery Industry News & Updates

A platform specially designed and developed to keep the industry updated with the right Knowledge, News and Information about developments happening in the Electric Vehicles & Battery sector

America Battery

A Tweak In The Battery Chemistry Could Double Electric Vehicle Range

Researchers at the Pacific Northwest National Laboratory (PNNL) have made a chemical breakthrough that they believe will allow electric vehicles batteries to hold almost twice the energy of their traditionally-used lithium-ion counterparts.

The solution in question is a lithium-metal chemistry with an energy density of 350 watt-hours per kilogram (Wh/kg), which is on the higher end of the spectrum, but not entirely in a league of its own. The chemistry has the added advantage of being much lighter than traditional lithium-ion chemistries.

These aspects of lithium-metal are not new, however. What is new is the resilience of the battery. Historically, lithium-metal batteries have been plagued by premature death, with previous record holders accomplishing just 200 cycles before seeing significant drops in capacity.

The chemistry developed by the PNNL team was able to maintain 76% of its initial capacity after 600 cycles, blowing the old record out of the water. There is still work to be done for sure, as currently-used EV batteries typically last for around 1,000 cycles.

The breakthrough was achieved when researchers decided to test thin strips of lithium-metal, thinner than a strand of hair. This decision broke with tradition, as it had been commonly thought that thicker lithium anodes would be optimal. The researchers instead found the opposite to be true, coming to the conclusion that thicker strips contribute directly to battery failure, due to complex reactions around a film on the anode known as the solid electrolyte interphase.

Under optimal conditions, solid electrolyte interphase acts as a molecular gatekeeper between the anode and the electrolyte. Thinner lithium strips, it was found, retain contact between the liquid electrolyte and the anode, making important electrochemical reactions possible.

The work was funded by DOE’s Office of Energy Efficiency and Renewable Energy’s Vehicle Technologies Office and work was done through DOE’s Innovation Center for Battery500 Consortium, a multi-institution effort led by PNNL to develop electric vehicle batteries that are lighter, more energy intensive and less expensive than those currently used. The name Battery500 comes from the consortium’s foundational goal of developing a 500 watt-hours per kilogram battery.